Customer Reviews for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
This product is no longer available. Continue shopping at Parts Express.
Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Part #: 264-235 Selenium's D210Ti is recommended for use in monitor speakers, stage monitors and surround speakers in movie theaters. Compatible with 1-3/8"-18 TPI mount horns.
Average Customer Rating:
(53 Reviews) 53
Rating Snapshot (53 reviews)
5 stars
25
4 stars
27
3 stars
1
2 stars
0
1 star
0
Customer Reviews for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Review 1 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great product, but not a drop-in upgrade.
June 17, 2008
Parts Express Customer - 12318
Location:Unknown Location
Technical Knowledge:Professional
Experience with product:I own it
Value:
4
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I got a pair of these Selenium D210Ti's to upgrade my JRX 112m monitors. First I encountered that because this driver is larger in diameter than the stock JBL HF driver, it would interfere with the handle housing on the top of the 112m monitor. Then I removed the handle housing just to do some test. I immediately can tell the high end is more pronounced. But in some instruments, the HF actually sounds too pronounced, to a point of being unrealistic. I think I can resolve this issue by bi-amp'ing, but probably not for a while.
This driver sounds great, and if integrated properly, will result in a very good sounding 2-way or 3-way speaker.
Review 2 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Really nice!
June 1, 2007
Parts Express Customer - 00211
Location:Unknown Location
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I swapped out the D200 for these! I have to admit that I am very pleased! I think that these crossover at 2K better than the D200's. These cost about $10 more but that is a small price to pay for a nice improvement! My reccomendation is to use this one (D210) for a 2-way system crossed at 1.6K/18db or 2K/12db. Use the D210 if you are designing a 3-way crossed at 3K/12db or higher. If you have the money forget about both of these and move on to a 2 inch Selenium driver!
Review 3 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Sounds way better than the suggested super tweeter
August 19, 2008
Parts Express Customer - 14347
Location:Unknown Location
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I attached it to a 12" and it sounds great; way better than the suggested tweeter. I used a 2K crossover and it seems to have done the job.
Review 4 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great improvement to JBL JRX125's!!
October 5, 2008
Astropccom - 15615
Location:Westwood, CA
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
Fantastic sound - easy install. Here is the instructions for installation on JRX series - http://www.youtube.com/watch?v=qowMG3fowR0
Enjoy
Review 5 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great Budget 1" Driver
September 22, 2008
AVL Solutions - 15268
Location:Lafayette, IN
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I use this in a stage monitor with two JBL 2118's. Handles the power and keeps up with deaf lead singers. Excellent product. I like it better than other drivers in it's price range, as well a couple higher priced 1"'s. At the current low price, I would just go ahead and buy a couple.
Review 6 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Surprised
November 2, 2008
Big Daddy - 16292
Location:new york
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I was very surprised how clean and powerful they sound, very efficient. I would consider replacing your cheaper drivers with this one in any of the less expensive PA cabinets.
Review 7 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great, clean driver!
June 24, 2008
Bitcore - 12539
Location:High Point, NC
Technical Knowledge:Amateur
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
4
out of
5
This replaced a horn driver in a JBL JRX115 cabinet with this one. I replaced the driver, put sound deadening material on the back of the horns, and removed the passive crossover - converting the cabs to bi-amp. Each step I compared to the stock cab, and the improvement was incredible with each step. The most improvement was replacing the driver. The deadening material (non asphalt, butyl rubber) nearly *eradicated* the honk, resonances, and ringing, significantly clearing up the top end from coloration & required less volume. Removing the passive crossover and converting to bi-amp with an active crossover was just icing on the cake - The drivers were much more controlled and lots of phase issues disappeared and the cabinet became crystal clear. In my opinion, the modified, bi-amp conversion of my JRX115's sound much better than an MRX 515, at almost half the cost.
My only complaint about the driver, are the spring loaded terminals. The spring is not as stiff as I would like, so thick gauge wire can slip off when re-installing the horns to the cabinets, and possibly if you set the cabinet down too hard and the wire are inserted from the bottom - I feel they may slip out.
Get a 4-pole (092-052) panel connector, replace the 1/4" jack on the JRX terminal cup with it (need to drill it out with a 7/8" bit), resolder some 10/12 guage wire to them, and remove that passive crossover and never look back.
For DJ work and sound re-enforcement for 100-500 people, this is a huge step up in terms of ineligibility and clarity, and and will make your use of power and headroom much more effective and comfortable.
My only complaint about the driver, are the spring loaded terminals. The spring is not as stiff as I would like, so thick gauge wire can slip off when re-installing the horns to the cabinets, and possibly if you set the cabinet down too hard and the wire are inserted from the bottom - I feel they may slip out.
Get a 4-pole (092-052) panel connector, replace the 1/4" jack on the JRX terminal cup with it (need to drill it out with a 7/8" bit), resolder some 10/12 guage wire to them, and remove that passive crossover and never look back.
For DJ work and sound re-enforcement for 100-500 people, this is a huge step up in terms of ineligibility and clarity, and and will make your use of power and headroom much more effective and comfortable.
Review 8 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
TOO EARLY TO TELL
September 3, 2007
D J 'TOOM' - 01988
Location:ERIE PA
Technical Knowledge:Amateur
Experience with product:I own it
Value:
2
out of
5
Performance:
4
out of
5
Features:
2
out of
5
JUST TESTED IT BRIEFLY. DID NOT USE IT YET AT A 'GIG', BUT IT SEEMS TO SOUND AS GOOD AS THE ONE THAT BURNED OUT.
Review 9 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
These drivers do what their specs claim they do
August 7, 2008
Dan K - 13969
Location:Minneapolis MN
Technical Knowledge:Amateur
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I've tried a number of drivers in the $20-50 range, including other Selemium modles, and have usually been disapointed. These drivers are the exception. They sound great and do just what their specs say they should do. I just replaced a pair of vintage Altec-Lancing 511 horns with 808 drivers because this driver, with a $5.50 plastic horn, sounds better.
Review 10 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Good replacement driver
December 6, 2008
Dave - 17026
Location:Omabanation
Technical Knowledge:Amateur
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
Bought this as a replacement driver for the horns in a JBL JRX115 which are notorious for blowing horn drivers. This one seems to work very well. Nice crisp highs and not too harsh. Much better than the stock JBL and the price is very good.
Review 11 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Works good
December 30, 2008
Dave - 17890
Location:Brownstown, Illinois
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I was impressed with the quality of this driver for the price.I replaced a blown piezo tweeter with this and a cheap horn lense, added a crossover and L-pad, and it works nicely with a 12" speaker in my monitor. The sound is slightly sharp but nothing a little E.Q. adjustment couldn't cure. I can definately reccommend this driver as a replacement for cheap piezos.
Review 12 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great tweet for $34
October 23, 2007
dave - 03560
Location:Providence, RI
Technical Knowledge:Professional
Experience with product:I own it
Value:
4
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I bought 3 of these as replacements for floor monitors in a club. With the rate that spilled beer was destroying the stock drivers, I needed a cheaper alternative. Sound quality wasn't the primary goal here, being able to hear a vocal over a metal band was. I didn't expect them to sound this good to be quite honest. I wouldn't use them for FOH, but they make a pretty good floor monitor
Review 13 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Loud and clean driver
April 3, 2008
Deano Bravo - 09732
Location:Rudolph, WI
Technical Knowledge:Amateur
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I just got a pair of these to replace the stock drivers in a pair of behringer F1220 monitors. What a difference it made. I may have to pull back the 2k on the eq slightly. They turned those cabs into a "in your face" monitor. Very loud and clean. For the price, these are awesome drivers.
Review 14 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great buy
November 21, 2008
DerekC - 16741
Location:Eugene, OR
Technical Knowledge:Amateur
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
2
out of
5
I got one of these to replace a blown out driver on my JBL JRX100. Vast improvement over the stock driver. Sound quality and power handling are both much better. I'm fairly confident it will last longer as well, or at least as long as the original (about 4 years).
Review 15 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Great high frequency driver!!!!
August 23, 2007
DonDaMan - 01711
Location:Orlando, Florida
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I built a pair of two way cabinets using these drivers and I must say that I am happy with their performance. They truly do deliver crisp, powerful and well articulated highs. I also like the fact that they have presence. I definitely look forward to using this driver in my other designs, and would recommend it to anyone looking for a quality driver at a great price.
Review 16 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Excellent High End Driver
August 17, 2008
Dr Phil SR/MC/KJ/DJ - 14282
Location:Fishers, Indiana
Technical Knowledge:Professional
Experience with product:I own it
Value:
4
out of
5
Performance:
4
out of
5
Features:
4
out of
5
Replaced the original 2412h drivers from my JRX115's (well known in the SR community for their honky sound). These Selenium drivers are very smooth from 1.6k to 18k and sound very good all the way to high SPL. I use the Jrx115's with the Jrx118s. The vocals sound good on sm58 mics, but the drivers sounds at their best with shure sm86 and sm87. I'll be installing the 16 ohm bolt on version of this driver on my Yamaha's S115V mains very soon (original yamaha 105 db at 1m - Selenium D220ti 16 ohms is 109 db at 1m).
Great product for its price.
PS. Somebody from Atlanta posted in the D210ti Bolt 8 ohm driver that he had installed it in his Yamaha S115 and it was TOO LOUD. That is because the S115 uses the 16 ohm driver (8 ohm twice as loud)
Great product for its price.
PS. Somebody from Atlanta posted in the D210ti Bolt 8 ohm driver that he had installed it in his Yamaha S115 and it was TOO LOUD. That is because the S115 uses the 16 ohm driver (8 ohm twice as loud)
Review 17 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Smooth as Silk
August 1, 2007
Engineering Sound - 00762
Location:Bowling Green, Ohio
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
5
out of
5
Features:
5
out of
5
I used this driver in a three way cabinet crossed over at 3.5K. Very smooth high-end response, did not overpower the 8" sealed back mid or 12" woofer. Great vocal and cymbal reproduction does not break up under high power. I will use this driver again
Review 18 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Nice Product
June 19, 2008
Firecreek Singer - 12369
Location:Kansas City, Mo
Technical Knowledge:Professional
Experience with product:I've used it
Value:
5
out of
5
Performance:
4
out of
5
Features:
5
out of
5
This is great for either FOH or long distance monitor. Very crisp with alot of power. You will be suprised by size and weight of this driver. Part Express...Great Products, price and shipping will definetly buy from them again.
Review 19 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Good driver~!
September 22, 2008
Frankie Feedback - 15282
Location:NY/NJ
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
4
out of
5
Features:
5
out of
5
Used these to replace the POS HF drivers in my JBL JRX115s. These are not the best sounding drivers but are a GREAT upgrade from the stock JBLs. No more HARSH sizzle from the horns. By far the best value in threaded drivers when bought at Parts Express!
Review 20 for Selenium D210Ti 1" Titanium Horn Driver 1-3/8"-
Overall Rating:
Incredible deal!
December 20, 2008
franko - 17545
Location:NJ
Technical Knowledge:Professional
Experience with product:I own it
Value:
5
out of
5
Performance:
4
out of
5
Features:
4
out of
5
I replaced my JBL JRX HF drivers with these and I am VERY happy! My JBL drivers crapped out, I replaced the diaphrams and then blew them out too! These drivers have been kicking @$$ for months now. One of the best deals out there.